ELECRAFT KAF2 Betriebsanweisung PDF herunterladen (Seite 10)

- 7 -

Do not install jumper wires R18 and R19 on the back of the

board. Instead, install connectors J1 and J2 on the front as follows.

[ ]

Install a 5-pin female jack* on the top / component side at J1. It

must be seated flush on the board and be standing perpendicular to it.

Solder the center pin only.

[ ]

Similarly, install a 3-pin female jack* at J2, again only soldering

the center pin.

[ ]

Inspect both jacks to ensure they are seated flush against the board

and standing perpendicular to it.

[ ]

Solder the remaining pins of both jacks.

These connectors are provided with the Elecraft

KAF2 and KDSP2

options or the Rework Eliminator™ Aux Filter Jacks kit.

KAT2

KBT2

KPA100

KAF2

KDSP2

KNB2

K160RX

K60XV

KSB2

Multiple

REW•RK-FREE K2 ASSEMBLY

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 34 35

Keine Kommentare

ELECRAFT KAF2 Betriebsanweisung Seite 10