ELECRAFT KRX3 Betriebsanleitung PDF herunterladen (Seite 47)

A-2

Observe ESD precautions when working inside your K3. Wear an ESD wrist strap or frequently touch

an unpainted metal ground while working.

Remove the chassis stiffener bar that runs across the top of the K3 (see Figure A-2. Removing the Chassis

Stiffener Bar.) .

Figure A-2. Removing the Chassis Stiffener Bar.

If your K3 has the K144XV 2-meter option installed, remove the three 6-32 black flat head screws holding it

to the left side panel (see Figure A-3). Unplug the cables going to the K144XV module. The red power wire plugs

into the K3’s main RF board. Unplug it and set it aside with the module.

Figure A-3. Removing the K144XV Module

1 2 ... 42 43 44 45 46 47 48 49 50 51 52

Keine Kommentare

ELECRAFT KRX3 Betriebsanleitung Seite 47