Elecraft AT1 41 dB Step Attenuator Bedienungsanleitung PDF herunterladen (Seite 6)

Circuit Description

Refer to the schematic diagram below. There are six independent resistive attenuator networks. A pi-section circuit is used so

the circuit is symmetrical. Either connector may be used for the input or output. Each attenuator network may be switched in

or out of the signal path by the associated slide switch.

1 2 3 4 5 6

Keine Kommentare

Elecraft AT1 41 dB Step Attenuator Bedienungsanleitung Seite 6